AMAL CONCENTRIC MK II

The items listed below are for 2900 series four stroke carburetors. This series ranges in size from 28mm to 34mm, the sizes used on most British twins. Though not stocked, we can supply parts for the 2600 (22 - 26mm) and 2000 (36 - 40mm) MKII series carburetors and for the two stroke versions of all three series. Please note - Amal spares are slow sellers and not all parts are in stock at all times. The while we can obtain most parts within 48 hours, unfortunately the price may have substantially increased since our last delivery, which is what the price shown on our Price List page is based on. Items that were out of stock when ordered will be billed based on our current cost not the published price. 

AMAL CONCENTRIC MK II
Item # Description Order # Cost
1 Cable Adjuster F601  
1A Rubber Cable Sleeve F601A  
2 Cable Adjuster Nut F602  
3 Mixing Chamber Top F603  
4 Throttle Spring F604  
5 Needle Retaining Disc F605  
6 Needle Clip F606  
7 Throttle Needle - 4 stroke #2A1 F607A  
Throttle Needle - 4 stroke #2C3 F607B  
8 Throttle Slide #2.0 (zinc) - Rich F608A  
Throttle Slide #2.5 (zinc) F608B  
Throttle Slide #3.0 (zinc F608C  
Throttle Slide #3.5 (zinc) F608D  
Throttle Slide #4.0 (zinc) - Lean F608E  
Throttle Slide #3.0 (chrome brass) F608F  
Throttle Slide #3.5 (chrome brass) F608G  
Throttle Slide #4.0 (chrome brass) F608H  
9 Carb Body Call  
10 Cold Start Plunger Assembly F610  
11 Cold Start Lever & Bracket F611A  
Cold Start Bracket only F611B  
12 Cold Start Click Spring F612  
13 Air intake Adapter F613  
14 Air intake Adapter Screw F614  
15 Needle Jet - 4 Stroke Rich #105 F615A  
Needle Jet - 4 Stroke #106 F615B  
Needle Jet - 4 Stroke Lean #107 F615C  
16 Jet Holder - Long F616A  
Jet Holder - Short F616B  
17 Main Jet -order number plus size F222  
18 Float Spindle F618  
19 Float - Std. F619  
20 Float Needle - viton F620  
21 Filter F621  
22 Banjo - Single for 1/4" line F622A  
Banjo - Double, 180 deg, 1/4" line F622B  
Banjo - Double, 55 deg, 5/16" line F622C  
Banjo - Double, 150 deg, 5/16" line F622D  
23 Banjo Bolt F623  
24 Pilot Air Screw F624  
25 Throttle Stop Screw F625  
26 Pilot Jet -order number plus size F626  
Typical 4 stroke - #15 = lean / #35 = rich
26A Pilot Jet Blanking Plug F626A  
27 Float Bowl Gasket F627  
28 Cold Start Jet -order # plus size F628  
Typical 4 stroke - #30 = lean / #60 = rich
29 Float Bowl - Std. F629  
30 Float Bowl Securing Screw F630  
31 Drain Plug Washer F631  
32 Float Bowl Drain Plug F632  
33 Velocity Stack - Racing F295  
34 Velocity Stack Securing Screw F634  
35 Cable Adjuster F635  
36 Cable Adjuster Nut F636  
37 Cold Start Adapter F637  
38 Cold Start Spring F638  
39 Cold Start Plunger Cap F639  
40 Cold Start Plunger F640A  
Cable Operated Cold Start Kit F640B  
41 Primary Air Jet F641  
42 Air Vent Pipe F642  
43 Air Vent Pipe Clip F643  
44 Rubber Stub Adapter F644  
45 Adapter Clamp F645  
--- Gasket Set F220  

Home | E-mail us | Back to the top